How to program 2001 buick regal keyless remote

Insert the ignition key into the ignition lock cylinder and remove the key. Do not turn the ignition key in the lock cylinder. Insert the ignition key into the ignition lock cylinder. Leave the ignition key in the ignition lock cylinder.

Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed this take approximately 15 seconds.

Perform the previous step to program up to four transmitters including your old ones. Remove the ignition key in order to exit the Program Mode. Can I Program an ignition key?

Go to LocateALocksmith. Call to find a Locksmith in your area. Programming of the remote only requires the remote itself and your ignition key, and you will have the system ready to use right away. Enter your vehicle with your ignition key in hand and close all of the vehicle's doors behind you.

Insert the key into the ignition, turn it to the "On" position, return it to the "Off" position and remove the key from the ignition. Press and hold the "Unlock" tab on the driver's side door and insert and remove the key from the ignition three times in quick succession.

Release the "Unlock" tab on the door and wait for the vehicle to emit three beeps. Press and hold the "Lock" and "Unlock" buttons on your remote until the vehicle beeps twice to indicate successful programming. Repeat step 5 with any additional remotes and remove the key from the ignition to end the programming sequence.

Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area.